Static & Dynamic ADAS Calibration in Neptune, NJ
Comprehensive calibration for every scenario: in-center, road-test, and mobile. OEM procedures. Documented results. Fast turnaround.
Static ADAS Calibration in Neptune, NJ
Performed in our controlled calibration center at 1101 Route 33, Neptune, NJ. Static calibration uses precision-positioned targets to align forward-facing cameras, radar modules, and sensor arrays to OEM specifications.
- Controlled indoor environment eliminates weather and lighting variables
- Factory-spec targets positioned with laser-level accuracy
- Pre-scan and post-scan verification of every system
- Calibration certificate and documentation included
Frequently Asked
Most static calibrations are completed in 45 to 90 minutes depending on the number of systems and vehicle make. We schedule to minimize wait time and can usually return the vehicle same day.
For static calibration, yes -- our Neptune facility has the controlled environment and precision targets required. If transporting the vehicle is difficult, ask about our mobile static unit for qualifying jobs.
Dynamic ADAS Calibration
Some systems require road-test calibration at specific speeds and conditions. Our technicians perform dynamic calibrations following manufacturer-specified drive procedures to verify real-world sensor accuracy.
- Road-test calibration at OEM-required speeds
- Adaptive cruise control and lane-keeping verification
- Combined with static calibration when both are required
- Full documentation of drive parameters and results
Frequently Asked
Some manufacturers require both static and dynamic calibration, especially for adaptive cruise control and lane-keeping systems. We check OEM requirements for every vehicle and will advise you if a road test is needed.
Dynamic calibration is often bundled with the static procedure when both are required by the OEM. We will quote the full scope before starting work so there are no surprises.
Mobile ADAS Calibration Service
We bring OEM-grade calibration equipment directly to your shop. Our mobile service covers Philadelphia County, Camden County, Burlington County, Cherry Hill, and surrounding areas so you never have to transport vehicles off-site.
- Full-service mobile unit with factory targets and scan tools
- Service available across Philadelphia, Camden, and Burlington Counties
- On-site calibration at your body shop, glass shop, or dealership
- Same-day and next-day scheduling for priority jobs
Frequently Asked
Our mobile unit serves Philadelphia County, Camden County, Burlington County, Cherry Hill, and most of central and southern New Jersey. Contact us with your address and we will confirm coverage.
Yes. Our mobile unit carries the same OEM-grade targets and scan tools used at our Neptune facility. We set up a controlled environment at your location and follow identical procedures.
Windshield / Camera Calibration After Glass Replacement
When a windshield with a mounted forward-facing camera is replaced, calibration is mandatory. We recalibrate the camera system to ensure lane departure, collision avoidance, and other vision-based systems perform accurately.
- Required after every windshield replacement on camera-equipped vehicles
- Covers monocular and stereo camera systems
- Works with all major glass shop workflows
- Prevents false alerts and system malfunctions
Frequently Asked
If the vehicle has a forward-facing camera mounted to the windshield, yes. Even minor shifts during glass installation can throw off camera alignment and compromise safety systems like automatic emergency braking.
Absolutely. We coordinate with glass installers daily. Your shop can send us the RO and we will schedule calibration to match your install timeline so the vehicle is completed in one visit.
Post-Collision ADAS Calibration
Even minor collisions can shift sensor positions beyond tolerance. After body work, frame straightening, or bumper replacement, ADAS systems must be recalibrated to restore factory safety performance.
- Critical after front, rear, or side-impact repairs
- Covers all sensor types: cameras, radar, ultrasonic, and lidar
- Insurance-friendly calibration reports and certificates
- Helps shops avoid liability from uncalibrated systems
Frequently Asked
In most cases, yes. ADAS calibration is recognized as a required step in collision repair. We provide detailed reports and certificates that support your insurance claim documentation.
We run a full pre-scan diagnostic to identify every system that was affected. This covers cameras, radar, blind spot sensors, and parking sensors. You do not need to determine the scope yourself.
Post-Alignment Calibration
Wheel alignment and suspension changes alter the geometry that ADAS sensors depend on. After alignment work, radar and camera angles must be verified and corrected to maintain accurate readings.
- Required after alignment, lift kits, and suspension modifications
- Recalibrates forward radar, cameras, and blind spot sensors
- Ensures adaptive cruise and collision systems read correctly
- Quick turnaround so alignment shops can complete jobs same-day
Frequently Asked
Not every alignment, but any alignment that changes ride height or thrust angle on a vehicle equipped with radar or cameras should trigger a check. We can advise based on the make, model, and alignment specs.
Yes. We offer same-day slots specifically for alignment shops so your customer gets the vehicle back without a second trip. Call us before or during the alignment and we will coordinate timing.
Neptune Calibration Center vs. Mobile Service
Choose the option that fits your workflow. Both deliver the same OEM-compliant results.
Neptune Center
- Controlled indoor environment
- Full static + dynamic capability
- Walk-in and scheduled appointments
- Fastest turnaround for local shops
Mobile Service
- We come to your shop or location
- Covers Philly, Cherry Hill, Camden, Burlington
- Same OEM targets and scan tools
- Ideal for high-volume collision centers
Comprehensive Coverage for All ADAS Systems
We calibrate every major driver-assist technology across all makes and models.
Need a Calibration?
Contact us to schedule at our Neptune center or request mobile service at your location.